Axle Oil - JLG sky trak mmv Service Manual

2.13.11

Axle Oil

a. Axle Oil Level Check
250
MS21702
1. Level the vehicle, ground the attachment, place the
travel select lever in the [N] NEUTRAL position, place
the neutral lock lever in the [N] NEUTRAL LOCK
position, engage the parking brake switch and shut
the engine OFF.
2. Clean the area around the axle fill (4), and level
plugs (5) then remove the plugs from the axle
housing.
3. Add oil (see the following chart for oil
recommendations) to bring the oil level up, even with
the bottom of the level plug holes.
Recommended Axle Oil/Temperature Range
MIL-PRF-2104G Grade 10W30
(Universal Tractor Fluid*)
100° F (38° C)
*John Deere (JDM J20C Hy-Gard)
*Ford/New Holland ESN-M2C134-D (Hydraulic Oil 134)
*Massey Ferguson M-1141 (Permatran lll)
*Chevron 1000 THF
Model MMV Rev. 12/04
General Information, Specifications and Maintenance
OT0460
MIL-PRF-2104G Grade 15W40
OM1680
Note: ALWAYS replace used o-rings with new o-rings to
ensure proper sealing.
4. Reinstall the axle fill (4) and level (5) plugs into the
axle housing using new o-rings. Torque the axle fill
and level plugs to 96 lb/ft (130 Nm).
b. Axle Oil Change
1 000
50
OH26701
1. Level the vehicle, ground the attachment, place the
travel select lever in the [N] NEUTRAL position, place
the neutral lock lever in the [N] NEUTRAL LOCK
position, engage the parking brake switch and shut
the engine OFF.
2. Place an Accident Prevention Tag on both the
ignition switch and steering wheel, stating that the
vehicle should not be operated. (Refer to Section
1.5, Accident Prevention Tag Usage .)
3. Clean the area around both the axle fill (4), axle level
plugs (5) and the axle drain plug (6).
4. Place a suitable receptacle under the axle drain
plug (6). Remove the plug from the axle housing and
allow the axle oil to drain completely.
5. Transfer the oil to a container with a cover and label
the container as used axle oil. Dispose of used oil at
an approved recycling facility.
6. Remove the axle fill/level plug (4) from the axle
housing.
4
5
6
MS21902
OT02702
OT0440
2.45