Engine Oil - JLG G5-18A Operation Manual

Section 7 - Lubrication and Maintenance

Engine Oil

A. Engine Oil Level Check
4
OAH2200
1. Perform "Shut-Down Procedure" on page 4-4.
2. Open the engine cover.
3. Remove dipstick (1) and check oil mark. The oil should be between the full (2) and
add (3) marks within the crosshatched area of the dipstick.
4. Replace dipstick.
5. If oil is low, remove oil fill cap (4) and add motor oil to bring oil up to the full mark in
the crosshatch area.
6. Replace oil fill cap.
7. Close and secure the engine cover.
7-10
10
OW0970
2
1
OW1020
3
31200743