JLG sky trak mmv Service Manual page 289

11. Reconnect the discharge (1) and pilot (2) hoses at
the compressor (3) on the engine.
12. Remove transmission capscrew (4) holding the right
side of transmission lift plate (5). Re-install the
clamp (6) and compressor hoses (1 & 2) with the
capscrew to secure the lift plate, clamp and hoses to
the transmission.
3
1
2
13. Secure the throttle cable (8) to the engine throttle
lever (13), located just above the starter.
14. Install the throttle cable mount clamp (14) over the
throttle cable (7).
Model MMV Rev. 12/04
1
5
2
6
4
MM3131
Engine: Cummins 4BTA 3.9
12
13
8
10
9
15. Connect the fuel inlet line (9) to the fuel lift
pump (10).
16. Connect the fuel return line (11) to the fuel injector
pump (12).
17. Connect the wiring harness leads to the steer select
valve leads (15).
11
14
7
MM3050
8.37