JLG sky trak mmv Service Manual page 293

42. Connect the engine coolant temperature switch
lead (1) and oil pressure switch lead (2). (Refer to
Section 10.13.16, Engine Coolant High Temperature
Sender and Section 10.13.15, Engine Low Oil
Pressure Sender. )
43. Uncap and re-connect the two remote engine filter
hoses (3) to the engine block.
Model MMV Rev. 12/04
44. Connect the hydraulic low temperature sending unit
2
1
45. Connect the alternator ground (7), R (8), B+ (9),
3
MM3081
Engine: Cummins 4BTA 3.9
lead (4) and the hydraulic filter sending unit lead (5)
to the wiring harness connector (6).
5
and I (10) wire leads.
7
10
6
4
MT0770
9
8
MM3070
8.41