Operator's Cab; Operator's Cab Description; Serial Number Decal - JLG sky trak mmv Service Manual

WARNING:
vehicle without following all safety precautions
as outlined in the "Safety Practices" section of
this manual. Failure to follow the safety prac-
tices may result in death or serious injury.
3.2

OPERATOR'S CAB

3.2.1

Operator's Cab Description

The welded metal cab features European styling and a
modular design, allowing for a relatively quick, simple ex-
change of the entire cab and/or component parts. The
cab is bolted to the cab mount, which in turn is bolted to
the frame.
The cab is set-up as an enclosed cab configuration. The
enclosed cab includes a heater/window defroster system,
and windshield, roof and rear window wipers.
The operator's cab is a protective structure. The cab itself
contains roll-over protective and falling object protective
structures (ROPS/FOPS) for the operator.
WARNING:
by this ROPS/FOPS will be impaired if sub-
jected to any modification or structural dam-
age, at which time replacement is necessary.
ROPS/FOPS must be properly installed using
fasteners of correct size and grade, and
torqued to their specified value.
DO NOT weld, grind, drill, repair or modify the cab in any
way. Any modification or damage to cab structural com-
ponents requires cab replacement. The lives of the oper-
ator and others are potentially at stake.
Model MMV Rev. 12/04
DO NOT service the
The protection offered
Cab, Covers and Mirrors
To help ensure optimum safety, protection and perfor-
mance, replace the cab if it is damaged. Refer to the
appropriate parts manual for ordering information.
The cab contains the seat, operating controls, numerous
panels, steering and brake components, and more.
Covers and mirrors on the vehicle exist for safety, protec-
tion and appearance. They are relatively simple to re-
move and replace.
3.2.2

Serial Number Decal

The cab serial number decal (1) is located on the left side
of the cab, behind the seat. Information specified on the
serial number plate includes the cab model number, the
cab serial number and other data. Write this information
down in a convenient location to use in cab correspon-
dence.
1
Front
MM2180
3.3