Dot1X Timer - H3C s3100 series Command Manual

The 802.1x proxy checking function needs the cooperation of H3C's 802.1x client program.
The proxy checking function takes effect only after the client version checking function is enabled
on the switch (using the dot1x version-check command).
Related command: display dot1x.
Example
# Configure to disconnect the users connected to Ethernet1/0/1 through Ethernet1/0/8 ports if they are
detected logging in through proxies.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] dot1x supp-proxy-check logoff
[Sysname] dot1x supp-proxy-check logoff interface Ethernet 1/0/1 to Ethernet 1/0/8
# Configure the switch to send Trap packets if the users connected to Ethernet1/0/9 port is detected
logging in through proxies.
[Sysname] dot1x supp-proxy-check trap
[Sysname] dot1x supp-proxy-check trap interface Ethernet 1/0/9

dot1x timer

Syntax
dot1x timer { handshake-period handshake-period-value | quiet-period quiet-period-value |
server-timeout server-timeout-value | supp-timeout supp-timeout-value | tx-period tx-period-value |
ver-period ver-period-value }
undo dot1x timer { handshake-period | quiet-period | server-timeout | supp-timeout | tx-period |
ver-period }
View
System view
Parameter
handshake-period handshake-period-value: Sets the handshake timer. This timer sets the
handshake-period and is triggered after a supplicant system passes the authentication. It sets the
interval for a switch to send handshake request packets to online users. If you set the number of retries
to N by using the dot1x retry command, an online user is considered offline when the switch does not
receive response packets from it in a period N times of the handshake-period.
The handshake-period-value argument ranges from 5 to 1,024 (in seconds). By default, the handshake
timer is set to 15 seconds.
quiet-period quiet-period-value: Sets the quiet-period timer. This timer sets the quiet-period. When a
supplicant system fails to pass the authentication, the switch quiets for the set period (set by the
quiet-period timer) before it processes another authentication request re-initiated by the supplicant
1-18