(The following displayed information is omitted)
Table 1-5 Description on the fields of the display unit command
Aux1/0/0
Description : Aux Interface
For the description of other fields, refer to
duplex
Syntax
duplex { auto | full | half }
undo duplex
View
Ethernet port view
Parameter
auto: Sets the port to auto-negotiation mode.
full: Sets the port to full duplex mode.
half: Sets the port to half duplex mode.
Description
Use the duplex command to set the duplex mode of the current port.
Use the undo duplex command to restore the default duplex mode, that is, auto-negotiation.
By default, the port is in auto-negotiation mode.
Related command: speed.
Example
# Set the Ethernet1/0/1 port to auto-negotiation mode.
<Sysname>
system-view
System View: return to User View with Ctrl+Z.
[Sysname] interface Ethernet 1/0/1
[Sysname-Ethernet1/0/1] duplex auto
enable log updown
Syntax
enable log updown
undo enable log updown
View
Ethernet port view
Field
Table
1-14
Description
The description string of the AUX port is "Aux
Interface".
1-3.