Super Authentication-Mode - H3C s3100 series Command Manual

Hide thumbs Also See for s3100 series:
Table of Contents

Advertisement

You can switch between user levels after logging into a switch successfully. The high-to-low user
level switching is unlimited. However, the low-to-high user level switching requires the
corresponding authentication. The authentication mode can be set through the super
authentication-mode command.
For security purpose, the password entered is not displayed when you switch to another user level.
You will remain at the original user level if you have tried three times but failed to enter the correct
authentication information.
Related commands: super authentication-mode, super password.
Examples
# Switch from the current user level to user level 3, using super password authentication.
<Sysname> super 3
Password:
User privilege level is 3, and only those commands can be used
whose level is equal or less than this.
Privilege note: 0-VISIT, 1-MONITOR, 2-SYSTEM, 3-MANAGE
# Switch from the current user level to level 3, using HWTACACS authentication.
<Sysname> super 3
Username: user@system
Password:
User privilege level is 3, and only those commands can be used
whose level is equal or less than this.
Privilege note: 0-VISIT, 1-MONITOR, 2-SYSTEM, 3-MANAGE

super authentication-mode

Syntax
super authentication-mode { super-password | scheme }*
undo super authentication-mode
View
User interface view
Parameters
super-password: Adopts super password authentication for low-to-high user level switching.
scheme: Adopts Huawei terminal access controller access control system (HWTACACS)
authentication for low-to-high user level switching.
Description
Use the super authentication-mode command to specify the authentication mode used for low-to-high
user level switching.
Use the undo super authentication-mode command to restore the default.
By default, super password authentication is adopted for low-to-high user level switching.
Note that the two authentication modes, super password authentication and HWTACACS
authentication, are available at the same time to provide authentication redundancy. When both the two
1-5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents