Show Mac Access-Group - Dell Catalyst 3130 Command Reference Manual

show mac access-group

show mac access-group
Use the show mac access-group user EXEC command to display the MAC access control lists (ACLs)
configured for an interface or a switch.
Syntax Description interface interface-id
| begin
| exclude
| include
expression
Command Modes User EXEC
Command History Release
12.2(40)EX1
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples This is an example of output from the show mac-access group user EXEC command. In this display,
port 2 has the MAC access list macl_e1 applied; no MAC ACLs are applied to other interfaces.
Switch> show mac access-group
Interface GigabitEthernet1/0/1:
Inbound access-list is not set
Interface GigabitEthernet1/0/2:
Inbound access-list is macl_e1
Interface GigabitEthernet1/0/3:
Inbound access-list is not set
Interface GigabitEthernet1/0/4:
Inbound access-list is not set
<output truncated>
This is an example of output from the show mac access-group interface gigabitethernet1/0/1
command:
Switch# show mac access-group interface gigabitethernet1/0/1
Interface GigabitEthernet1/0/1:
Inbound access-list is macl_e1
Cisco Catalyst Blade Switch 3120 for HP Command Reference
2-590
show mac access-group [interface interface-id] [ | {begin | exclude | include} expression]
(Optional) Display the MAC ACLs configured on a specific interface. Valid
interfaces are physical ports and port channels; the port-channel range is 1
to 64 (available only in privileged EXEC mode).
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands
OL-12248-03