Telnet-Peer-Stack-Unit; Terminal Length - Dell Force10 S4810P Reference Manual

Version 8.3.11.1
Version 8.2.1.0
Version 8.1.1.0
Version 7.9.1.0
Version 7.6.1.0
Version 7.5.1.0

telnet-peer-stack-unit

Open a Telnet connection to the peer stack unit.
S-Series, Z-Series
Syntax telnet-peer-stack-unit
Defaults Not configured.
Command Modes
Command History
Version 8.3.11.1
Version 8.3.11.1

terminal length

Configure the number of lines displayed on the terminal screen.
C-Series, E-Series, S-Series, Z-Series
Syntax terminal length screen-length
Parameters
screen-length
Defaults 24 lines
Introduced on the Z9000.
Introduced on the E-Series ExaScale (IPv6). Increased the number of
VLANs on ExaScale to 4094 (was 2094).
Introduced on the E-Series ExaScale (IPv4).
Introduced VRF.
Introduced on the S-Series.
Introduced on the C-Series and added support for IPv6 address on
the E-Series only.
• EXEC
• EXEC Privilege
Introduced on the Z9000.
Introduced on the S-Series.
Enter a number of lines. Entering zero causes the terminal to display
without pausing. The range is 0 to 512.
195