Show System (S-Series And Z-Series) - Dell Force10 S4810P Reference Manual

Example
FTOS# show switch links backplane
Switch fabric backplane link status:
Status
LC SlotID Port0 | Port1 | Port2 | Port3 | Port4 | Port5 |
Port6 | Port7
0
down
1
2
3
4
5
6
down
7
up - Both ends of the link are up
down - Both ends of the link are down
up / down - SFM side up and LC side down
down / up - SFM side down and LC side up
FTOS#

show system (S-Series and Z-Series)

Display the current status of all stack members or a specific member.
S-Series, Z-Series
Syntax show system [brief | stack-unit unit-id | stack-ports {status |
topology}]
Parameters
brief
stack-unit
stack-ports
status | topology
Command Modes
Command History
Version 8.3.11.4
184
SFM0 Links Status SFM1 Links
up up
not present
not present
not present
not present
not present
up up
not present
(OPTIONAL) Enter the keyword brief to view an abbreviated list of
system information.
unit-id
(OPTIONAL) Enter the keywords stack-unit followed by the stack
member ID for information on that stack member. The unit ID range
for the S4810 is 0-11. For all other S-Series, the unit ID range is 0-7.
(OPTIONAL) Enter the keywords stack-ports for information
about the status or topology of the S4810 stack ports.
NOTE: This option applies to the S4810 only.
• EXEC
• EXEC Privilege
The brief parameter no longer displays the current Reload mode.
To display Reload mode, use the show reload-type command.
up up down
up up down
down down
down down