Aaa Authentication Mac - Dell PowerConnect W-7200 Series Reference Manual

aaa authentication mac

aaa authentication mac <profile>
case upper|lower
clone <profile>
delimiter {colon|dash|none}
max-authentication-failures <number>
no ...
Description
This command configures the MAC authentication profile.
Syntax
Parameter
<profile>
case
clone <profile>
delimiter
max-authentication-failures
<number>
no
Usage Guidelines
MAC authentication profile configures authentication of devices based on their physical MAC address. MAC-based
authentication is often used to authenticate and allow network access through certain devices while denying access
to all other devices. Users may be required to authenticate themselves using other methods, depending upon the
network privileges.
Example
The following example configures a MAC authentication profile to blacklist client devices that fail to authenticate.
aaa authentication mac mac-blacklist
max-authentication-failures 3
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Name that identifies an instance of the profile. The
name must be 1-63 characters.
The case (upper or lower) used in the MAC string
sent in the authentication request. If there is no
delimiter configured, the MAC address in lower
case is sent in the format xxxxxxxxxxxx, while the
MAC address in upper case is sent in the format
XXXXXXXXXXXX.
Name of an existing MAC profile from which
parameter values are copied.
Delimiter (colon, dash, or none) used in the MAC
string.
Number of times a client can fail to authenticate
before it is blacklisted. A value of 0 disables
blacklisting.
Negates any configured parameter.
Range Default
— "default"
upper|low- lower
er
— —
colon|das- none
h|
none
0-10 0 (disabled)
— —
aaa authentication mac | 25