Table of Contents
Advertisement
Parameter
welcome-page <url>
white-list <white-list>
Usage Guidelines
You can configure the Captive Portal authentication profile in the base operating system or with the Next
Generation Policy Enforcement Firewall (PEFNG) license installed. When you configure the profile in the base
operating system, the name of the profile must be entered for the initial role in the AAA profile. Also, when you
configure the profile in the base operating system, you cannot define the default-role.
Example
The following example configures a Captive Portal authentication profile that authenticates users against the
controller's internal database. Users who are successfully authenticated are assigned the auth-guest role.
To create the auth-guest user role shown in this example, the PEFNG license must be installed in the controller.
aaa authentication captive-portal guestnet
default-role auth-guest
user-logon
no guest-logon
server-group internal
Command History
Version
ArubaOS 3.0
ArubaOS 6.0
ArubaOS 6.1
ArubaOS 6.2
Command Information
Platforms
All platforms
18 | aaa authentication captive-portal
Description
URL of the page that appears after logon and
before redirection to the web URL. This can
be set to any URL.
Name of an existing white list on an IPv4 or
IPv6 network destination. The white list
contains authenticated websites that a guest
can access. If you have not yet defined a
netdestination, use the CLI command
netdestination
to define a destination host or
subnet before you add it to the whitelist
Description
Command introduced.
The max-authentication-failures parameter no longer requires a license.
The sygate-on-demand, black-list and white-list parameters were added.
the auth-protocol parameter was added, and the user-chap parameter was dep-
recated.
Licensing
Base operating system, except for
noted parameters
Range
—
—
Command Mode
Config mode on master controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Default
/auth/we-
lcome.html
—
Advertisement
Table of Contents
