Table of Contents
Advertisement
23.Oil Charge Pipe
A: REMOVAL
1) Remove the intercooler. (Turbo model)
<Ref. to IN(H4DOTC)-12, REMOVAL, Intercool-
er.>
2) Remove the air intake chamber. (Non-turbo
model) <Ref. to IN(H6DO)-7, REMOVAL, Air Intake
Chamber.>
3) Remove the oil charge pipe, and then remove
the O-ring from flange side.
(A)
(A) Oil level gauge
(B) Oil charge pipe
B: INSTALLATION
1) Install the oil charge pipe with a new O-ring.
Tightening torque:
⋅
41 N
m (4.2 kgf-m, 30.2 ft-lb)
(A)
(A) Oil level gauge
(B) Oil charge pipe
2) Install the intercooler. (Turbo model) <Ref. to
IN(H4DOTC)-12, INSTALLATION, Intercooler.>
3) Install the air intake chamber. (Non-turbo model)
<Ref. to IN(H6DO)-7, INSTALLATION, Air Intake
Chamber.>
C: INSPECTION
Make sure the oil charge pipe is not deformed or
damaged.
Oil Charge Pipe
(B)
AT-01386
(B)
AT-01386
5AT-69
AUTOMATIC TRANSMISSION
Advertisement
Chapters
Table of Contents
