Subaru Legacy 2005 Service Manual page 2830

CLUTCH SYSTEM
3) Loosen the push rod lock nut.
(D)
(C)
(A) Clevis pin
(B) Snap pin
(C) Push rod
(D) Push rod lock nut
4) Turn the push rod to adjust.
(1) Ensure that the clutch pedal contacts clutch
switch side, when releasing the clutch pedal.
(2) Ensure that the clutch pedal contacts clutch
pedal bracket stopper, when fully depressing
the clutch pedal.
(A)
(B)
(C)
(D)
(A) Clevis hole
(B) Push rod lock nut
(C) Shortening direction
(D) Lengthening direction
(E) Push rod
(F) U shaped bracket
Clutch Pedal
(A)
(B)
CL-00042
(F)
(E)
CL-00080
5) Turn the push rod counterclockwise to shorten
until clearance is made at clutch switch side.
(A) Clutch switch
(B) Stopper
(C) Clearance
6) Turn the push rod clockwise to lengthen until the
clutch pedal contacts to clutch switch.
7) Turn the push rod further 270° counterclockwise
to shorten (the arrow direction shown in the figure).
• LHD model
(A) Accelerator pedal
(B) Clevis
• RHD model
(A)
(A) Clutch pedal
(B) Brake pedal
8) Move the clevis pin right and left to ensure it
moves smoothly.
CL-40
(C)
(A)
(B)
CL-00132
(B)
(A)
CL-00101
(B)
CL-00085