Table of Contents
Advertisement
MANUAL TRANSMISSION AND DIFFERENTIAL
5) Install the ball, valve spring and new seal bolt as-
sembly.
Tightening torque:
⋅
T1: 13 N
m (1.3 kgf-m, 9.6 ft-lb)
⋅
T2: 16 N
m (1.6 kgf-m, 11.8 ft-lb)
(A)
(B)
(C)
(A) Seal bolt assembly
(B) Relief valve spring
(C) Relief valve
(D) Valve spring
(E) Ball
(F) Harness bracket
E: INSPECTION
1) Completely remove sludge using shop cloth if it
is adhered to the oil pan magnet.
2) Check the oil strainer for clogging. Remove clog-
ging or replace the oil strainer if there is clogging.
3) Check each part for damage. Replace the dam-
aged part with a new one.
Transmission Case
T1
T1
(A)
(D)
(E)
(F)
T2
MT-00542
6MT-68
Advertisement
Chapters
Table of Contents
