Subaru Legacy 2005 Service Manual page 2126

AUTOMATIC TRANSMISSION
4) Apply ATF to new seal ring, and install them.
(A)
(A) Seal ring
(B) Reduction drive shaft
E: INSPECTION
• Rotate the bearing by hand, Check that it rotates
smoothly.
• Check each part for hole, damage or other for-
eign matters.
• Measure the extension end play and adjust it to
within specification. <Ref. to 4AT-90, ADJUST-
MENT, Transfer Clutch.>
Reduction Drive Gear
(B)
AT-00161
4AT-98