Table of Contents
Advertisement
22) Connect the following connectors:
(1) Transmission ground cable
Tightening torque:
⋅
13 N
m (1.3 kgf-m, 9.4 ft-lb)
(2) Neutral position switch connector
(3) Back-up light switch connector
(4) High-low switch connector (Dual-range
model)
23) Fill transmission gear oil through the transmis-
sion level gauge hole.
24) Install the air intake chamber stay.
Tightening torque:
⋅
16 N
m (1.6 kgf-m, 11.6 ft-lb)
25) Install the air intake chamber and air cleaner
case. <Ref. to IN(H4SO 2.0)-5, INSTALLATION,
Air Cleaner Case.> <Ref. to IN(H4SO 2.0)-7, IN-
STALLATION, Air Intake Chamber.>
26) Connect the battery ground cable to battery.
27) Take off the vehicle from lift arms.
Manual Transmission Assembly
5MT-35
MANUAL TRANSMISSION AND DIFFERENTIAL
Advertisement
Chapters
Table of Contents
