Subaru Legacy 2005 Service Manual page 2715

13.Reverse Check System
A: REMOVAL
1) Remove the manual transmission assembly
from vehicle. <Ref. to 6MT-34, REMOVAL, Manual
Transmission Assembly.>
2) Prepare the transmission for overhaul. <Ref. to
6MT-40, Preparation for Overhaul.>
3) Remove the extension case. <Ref. to 6MT-47,
REMOVAL, Extension Case.>
4) Remove the snap ring and washer from reverse
check shaft.
(A) Snap ring
(B) Washer
5) Remove the reverse check shaft and spring from
the extension case.
Reverse Check System
6) Remove the spring pin, then remove the reverse
check lever and oil seal from reverse check shaft.
NOTE:
Use a new oil seal.
(B)
(A)
7) Remove the plug from extension case, then re-
move the gasket, spring and plunger.
MT-00494
NOTE:
Use a new gasket.
MT-00495
8) Remove the reverse lock plunger.
6MT-53
MANUAL TRANSMISSION AND DIFFERENTIAL
(C)
(A) Spring pin
(B) Reverse check lever
(C) Oil seal
(A) Plug
(B) Gasket
(C) Spring
(D) Plunger
(A)
(A) Reverse lock plunger
(B)
(A)
MT-00496
(D)
(C)
(B)
(A)
MT-00497
MT-00498