Table of Contents
Advertisement
2) Check the swing torque of rod linked with the
gear shift lever.
If the torque exceeds the specifications, replace the
bushing or check the tightening of nuts.
Swing torque:
Less than 3.7 N (0.38 kgf, 0.83 lbf)
(B)
(A) Pivot
(B) Swing torque
2. 6MT MODEL
Check the parts (bushing, cushion rubber, spacer,
boot, stay and rod, etc.) for deformation, damage
and wear. If necessary, repair or replace faulty
parts. Compare the removed parts with new ones
to judge if there are damages or not.
MT Gear Shift Lever
(A)
CS-00116
CS-00586
CS-51
CONTROL SYSTEMS
Advertisement
Chapters
Table of Contents
