Table of Contents
Advertisement
AUTOMATIC TRANSMISSION
24) Install the clutch housing cover securing bolts.
25) Install the front crossmember support plate.
<Ref. to FS-14, INSTALLATION, Front Crossmem-
ber Support Plate.>
26) Install the propeller shaft. <Ref. to DS-11, IN-
STALLATION, Propeller Shaft.>
27) Install the shift select cable. <Ref. to CS-28, IN-
STALLATION, Select Cable.>
28) Install the turbine speed sensor 1 and harness,
and then connect the connector.
Tightening torque:
⋅
7 N
m (0.7 kgf-m, 5.2 ft-lb)
Automatic Transmission Assembly
AT-01373
AT-01374
AT-01736
5AT-44
29) Install the oil charge pipe.
Tightening torque:
⋅
41 N
m (4.2 kgf-m, 30.2 ft-lb)
30) Install the heat shield cover.
31) Install the center exhaust pipe, rear exhaust
pipe and muffler. (Turbo model) <Ref. to
EX(H4DOTC)-7, INSTALLATION, Center Exhaust
Pipe.> <Ref. to EX(H4DOTC)-11, INSTALLATION,
Rear Exhaust Pipe.> <Ref. to EX(H4DOTC)-12, IN-
STALLATION, Muffler.>
32) Install the front exhaust pipe, rear exhaust pipe
and
muffler.
(Non-turbo
EX(H6DO)-5, INSTALLATION, Front Exhaust
Pipe.> <Ref. to EX(H6DO)-7, INSTALLATION,
Rear Exhaust Pipe.> <Ref. to EX(H6DO)-9, IN-
STALLATION, Muffler.>
33) Install the under cover.
34) Lower the vehicle.
35) Install the linear motion mounting. (Turbo mod-
el) <Ref. to ME(H4DOTC)-38, INSTALLATION,
Linear Motion Mounting.>
36) Install the air cleaner case.
<Ref. to IN(H4DOTC)-8, INSTALLATION, Air
Cleaner Case.>
37) Install the air intake duct.
<Ref. to IN(H4DOTC)-9, INSTALLATION, Air In-
take Duct.>
AT-01371
AT-01331
model)
<Ref.
to
Advertisement
Chapters
Table of Contents
