Subaru Legacy 2005 Service Manual page 1975

C: PREPARATION TOOL
1. SPECIAL TOOL
ILLUSTRATION
ST18482AA000
ST22771AA030
D: CAUTION
• Wear work clothing, including a cap, protective
goggles, and protective shoes during operation.
• Remove contamination including dirt and corro-
sion before removal, installation or disassembly.
• Keep the disassembled parts in order and pro-
tect them from dust and dirt.
• Before removal, installation or disassembly, be
sure to clarify the failure. Avoid unnecessary re-
moval, installation, disassembly and replacement.
• Use SUBARU genuine fluid, grease etc. or
equivalent. Do not mix fluid, grease, etc. with that of
another grade or from other manufacturers.
• Be sure to tighten fasteners including bolts and
nuts to the specified torque.
• Place shop jacks or rigid racks at the specified
points.
• Apply grease onto sliding or revolution surfaces
before installation.
• Before installing O-rings or snap rings, apply suf-
ficient amount of fluid to avoid damage and defor-
mation.
• Before securing a part in a vice, place cushioning
material such as wood blocks, aluminum plate, or
cloth between the part and vice.
• Before disconnecting electrical connectors, be
sure to disconnect the ground cable from battery.
General Description
TOOL NUMBER DESCRIPTION
18482AA000 CARTRIDGE
(Newly adopted tool)
22771AA030 SUBARU SELECT
MONITOR KIT
CS-7
CONTROL SYSTEMS
REMARKS
Troubleshooting for electrical system.
Troubleshooting for electrical system.
• English: 22771AA030 (Without printer)
• German: 22771AA070 (Without printer)
• French: 22771AA080 (Without printer)
• Spanish: 22771AA090 (Without printer)