Subaru Legacy 2005 Service Manual page 2614

MANUAL TRANSMISSION AND DIFFERENTIAL
13.Reverse Check Sleeve
A: REMOVAL
1) Remove the manual transmission assembly
from vehicle. <Ref. to 5MT-30, REMOVAL, Manual
Transmission Assembly.>
2) Remove the transfer case with extension case
assembly. <Ref. to 5MT-43, REMOVAL, Transfer
Case and Extension Case Assembly.>
3) Remove the shifter arm.
4) Remove the plug, spring, washer and reverse
check ball.
5) Remove the reverse check sleeve.
B: INSTALLATION
1) Install the reverse check sleeve.
Tightening torque:
⋅
6.4 N m (0.65 kgf-m, 4.7 ft-lb)
Reverse Check Sleeve
2) Install the reverse check ball, spring, washer and
plug to transfer case.
Tightening torque:
10 N
3) Install the shifter arm to transfer case assembly.
4) Install the transfer case with extension case as-
sembly. <Ref. to 5MT-43, INSTALLATION, Trans-
fer Case and Extension Case Assembly.>
5) Install the manual transmission assembly into
vehicle. <Ref. to 5MT-32, INSTALLATION, Manual
Transmission Assembly.>
MT-00149
C: DISASSEMBLY
1) Cover the reverse check sleeve with a rag, and
remove the snap ring using a screwdriver.
NOTE:
Replace the snap ring with a new one if it is de-
formed or reactive force is weakened.
MT-00150
MT-00150
5MT-52
⋅
m (1.0 kgf-m, 7.4 ft-lb)
(A)
(A) Snap ring
MT-00149
MT-00153