Subaru Legacy 2005 Service Manual page 2001

6. Shift Lock Solenoid
A: REMOVAL
1) Remove the console box. <Ref. to EI-53, RE-
MOVAL, Console Box.>
2) Remove the ring indicator.
Insert the tip of a flap tip screwdriver into the gap
between ring indicator and console front panel, and
lift up gradually.
NOTE:
• Wrap the tip of a flat tip screwdriver with cloth.
• Insert the tip of a flat tip screwdriver into four
pawls, and remove the ring indicator equally and
gradually.
3) Remove the console front panel.
4) Remove the connector.
5) Press the shift lock release button, and shift the
select lever to "N" range.
6) Remove the grip.
7) Remove the indicator cover.
8) Remove the blind.
9) Remove the bolts, and then remove the guide
plate.
Shift Lock Solenoid
10) Remove the connector from the plate assembly
using a flat-tip screwdriver.
11) Press the select lever backward while lifting up
the detent spring, and remove the shift lock sole-
noid unit.
CS-00583
12) Raise the pawl of connector.
CS-00559
CS-00377
CS-33
(B)
(A) Detent spring
(B) Shift lock solenoid unit
CONTROL SYSTEMS
CS-00390
(A)
CS-00391
CS-00292