Subaru Legacy 2005 Service Manual page 1947

Diagnostic Procedure with Diagnostic Trouble Code (DTC)
Step
8 CHECK ACCELERATOR PEDAL POSITION
SENSOR.
Measure the resistance of accelerator pedal
position sensor.
Terminal
No. 5 — No. 4:
Check the measured value is within the specifi-
cation with the accelerator pedal depressed.
Check
Is the resistance 0.5 — 2.5
kΩ?
EN(H6DO)(diag)-251
ENGINE (DIAGNOSTICS)
Yes
Repair the poor Replace the accel-
contact in ECM erator pedal posi-
connector. tion sensor.
Replace the ECM
if defective. <Ref.
to FU(H6DO)-34,
Engine Control
Module (ECM).>
No