Table of Contents
Advertisement
Transfer Driven Gear
MANUAL TRANSMISSION AND DIFFERENTIAL
NOTE:
Do not apply pressure in excess of 10 kN (1 ton, 1.1
US ton, 1.0 Imp ton).
ST
(A)
MT-00514
(A) Roller bearing
E: INSPECTION
1) Bearing
Replace the bearings in the following cases.
• When there are breakage and rust on the bear-
ings.
• When there are wear or damage.
• When bearing that fails to turn smoothly or
makes noise after gear oil lubrication.
2) Driven gear
Replace the driven gear in the following case.
• When driven gear tooth surface and shaft are ex-
cessively broken or damaged.
6MT-59
Advertisement
Chapters
Table of Contents
