Table of Contents
Advertisement
17.Oil Pump
A: REMOVAL
1) Remove the manual transmission assembly
from vehicle. <Ref. to 6MT-34, REMOVAL, Manual
Transmission Assembly.>
2) Prepare the transmission for overhaul. <Ref. to
6MT-40, Preparation for Overhaul.>
3) Remove the extension case. <Ref. to 6MT-47,
REMOVAL, Extension Case.>
4) Remove the transfer driven gear. <Ref. to 6MT-
58, REMOVAL, Transfer Driven Gear.>
5) Remove the center differential. <Ref. to 6MT-60,
REMOVAL, Center Differential.>
6) Remove the oil guide.
(A) Oil guide
7) Remove the snap ring and flat washer.
(A) Snap ring
(B) Flat washer
Oil Pump
8) Using the ST, remove the neutral set spring and
support.
ST1 18756AA000 CLAW
ST2 399893600
9) Raise the striking rod up, then remove the spring
pin.
(A)
MT-00520
10) Remove the selector arm No. 2 and shifter arm.
(A)
(B)
MT-01306
6MT-61
MANUAL TRANSMISSION AND DIFFERENTIAL
PLIERS
ST2
ST2
(A)
(B)
(A) Striking rod
(B) Spring pin
(A)
(A) Selector arm No. 2
(B) Shifter arm
ST1
MT-01092
MT-01307
(B)
MT-01308
Advertisement
Chapters
Table of Contents
