Subaru Legacy 2005 Service Manual page 2003

C: INSPECTION
Step
1 CHECK SHIFT LOCK SOLENOID.
Measure the resistance of shift lock solenoid
connector terminals.
Terminal
No. 4 — No. 3:
2 CHECK SHIFT LOCK SOLENOID.
Connect the battery to shift lock solenoid con-
nector terminal, and then operate the solenoid.
Terminal
No. 3 (+) — No. 4 (
3 CHECK "P" RANGE SWITCH.
1) Set the select lever to "P" range.
2) Measure the resistance between "P" range
switch connector terminals.
Terminal
No. 1 — No. 2:
4 CHECK "P" RANGE SWITCH.
1) Set the select lever to other than "P" range.
2) Measure the resistance between "P" range
switch connector terminals.
Terminal
No. 1 — No. 2:
Shift Lock Solenoid
Is the resistance 12 — 18 Ω
Does the shift lock solenoid
operate normally?
−
):
Is the resistance less than 1
Ω?
Is the resistance more than 1
MΩ?
CS-35
Check
Go to step 2.
Go to step 3.
Go to step 4.
Normal
CONTROL SYSTEMS
Yes No
Replace the shift
lock solenoid.
Replace the shift
lock solenoid.
Replace the "P"
range switch.
Replace the "P"
range switch.