Table of Contents
Advertisement
10) Remove the detent plate.
11) Remove the shift lock solenoid unit.
12) Raise the pawl of connector.
13) Use a flat-tip screwdriver with thin tip to discon-
nect the connectors from terminals of SPORT
mode switch, "P" range switch and shift lock sole-
noid unit.
(A) "P" range switch terminal
(B) Shift lock solenoid terminal
(C) SPORT mode switch terminal
Select Lever
CS-00380
CS-00381
CS-00292
(B)
(A)
4
3
2 1
10
9 8 7
6 5
(C)
CS-00293
CS-25
14) Remove the grommet.
15) Remove the spring pin.
16) Pull out the arm assembly, and then remove
the select lever assembly to remove the arm and
bushing.
(C)
(A) Arm ASSY
(B) Select lever ASSY
(C) Arm
(D) Bushing
CONTROL SYSTEMS
CS-00296
CS-00297
(D)
(D)
(B)
(A)
CS-00298
Advertisement
Chapters
Table of Contents
