Subaru Legacy 2005 Service Manual page 1980

CONTROL SYSTEMS
D: INSPECTION
1. SHIFT LOCK OPERATION
Step
1 CHECK SHIFT LOCK.
1) Turn the ignition switch to ON.
2) Shift the select lever to "P" range.
2 CHECK SHIFT LOCK.
3 CHECK KEY INTERLOCK.
4 CHECK KEY INTERLOCK.
AT Shift Lock Control System
While brake pedal is not
depressed, can select lever
move from "P" range to other
ranges?
While brake pedal is
depressed, can select lever
move from "P" range to other
ranges?
Is the ignition switch turned to
the "LOCK" position when the
select lever is set to other than
"P" range?
Is the ignition switch turned to
the "LOCK" position when the
select lever is set to "P" range?
CS-12
Check
Inspect "SELECT
LEVER CANNOT
BE SHIFT
LOCKED". <Ref.
to CS-15, SELECT
LEVER CANNOT
BE SHIFTED,
INSPECTION, AT
Shift Lock Control
System.>
Go to step 3.
Inspect "KEY
INTERLOCK
DOES NOT BE
LOCKED OR
RELEASED".
<Ref. to CS-17,
SHIFT LOCK OF
SELECT LEVER
CANNOT BE
RELEASED,
INSPECTION, AT
Shift Lock Control
System.>
AT shift lock sys-
tem is normal.
Yes No
Go to step 2.
Inspect "SELECT
LEVER SHIFT
LOCK CANNOT
BE RELEASED".
<Ref. to CS-17,
SHIFT LOCK OF
SELECT LEVER
CANNOT BE
RELEASED,
INSPECTION, AT
Shift Lock Control
System.>
Go to step 4.
Inspect "KEY
INTERLOCK
DOES NOT BE
LOCKED OR
RELEASED".
<Ref. to CS-17,
SHIFT LOCK OF
SELECT LEVER
CANNOT BE
RELEASED,
INSPECTION, AT
Shift Lock Control
System.>