Subaru Legacy 2005 Service Manual page 2724

MANUAL TRANSMISSION AND DIFFERENTIAL
11) Using the ST, remove the oil pump shaft as-
sembly and the plate.
NOTE:
Remove the bolts using ST because damage may
occur if general tool is used.
ST 18663AA000 SOCKET
(B)
(A) Oil pump shaft assembly
(B) Plate
12) Using the ST, remove the oil pump cover as-
sembly.
NOTE:
Remove the bolts using ST because damage may
occur if general tool is used.
ST 18663AA000 SOCKET
13) Remove the thrust washer on main shaft part.
14) Remove the oil pump rotor.
(B)
(A)
(A) Outer rotor
(B) Inner rotor
Oil Pump
B: INSTALLATION
1) Apply oil to the outer periphery of outer rotor,
then install to transmission case.
(A)
MT-00521
2) Install the thrust washer to main shaft part.
3) Using the ST, install the oil pump cover assem-
bly.
Tightening torque:
25 N
ST 18663AA000 SOCKET
4) Using the ST, install the oil pump shaft assembly
and the plate.
MT-00522
Tightening torque:
25 N
ST 18663AA000 SOCKET
MT-00523
6MT-62
(B)
(A)
(A) Outer rotor
(B) Inner rotor
⋅
m (2.5 kgf-m, 18.4 ft-lb)
⋅
m (2.5 kgf-m, 18.4 ft-lb)
(B)
(A) Oil pump shaft assembly
(B) Plate
MT-00523
MT-00522
(A)
MT-00521