Table of Contents
Advertisement
AUTOMATIC TRANSMISSION
(5) On the "System Selection Menu" display
screen, select the {Transmission} and press the
[YES] key.
(6) Press the [YES] key after the information of
transmission type has been displayed.
(7) On the "Transmission Diagnosis" display
screen, select the {Clear Memory 2} and press
the [YES] key.
50) Perform the inspection with driving the vehicle
at the end of repair work, and make sure there is no
faulty as below;
• Excessive shift shock
• Oil leakage from transmission body and etc.
• Occurrence of noise caused by interference etc.
NOTE:
If excessive shift shock is felt, execute the advance
operation of learning control. <Ref. to 5AT(diag)-
23, PROCEDURE, Learning Control.>
Automatic Transmission Assembly
5AT-46
Advertisement
Chapters
Table of Contents
