Subaru Legacy 2005 Service Manual page 2748

MANUAL TRANSMISSION AND DIFFERENTIAL
6) Install the outer baulk ring.
7) Install the 1st-2nd hub.
NOTE:
• Align the protrusion portion of outer baulk ring
and cutout portion of 1st-2nd hub, then install.
• Be sure the 1st-2nd hub is installed in proper di-
rection.
(C)
(D)
(E)
(A) 1st-2nd hub
(B) Outer baulk ring
(C) Cutout portion of 1st-2nd hub
(D) Protrusion of outer baulk ring
(E) 1st driven gear
Driven Gear Assembly
8) Using the ST, install the 2nd hub.
ST 18654AA000 INSTALLER
CAUTION:
Do not apply pressure in excess of 40 kN (4.0
ton, 4.4 US ton, 3.9 Imp ton).
MT-00599
9) Make sure the 1st drive gear is smoothly turned
by hand. If it is not rotated smoothly, reassemble it.
(A)
10) Install the shifting insert key in proper place of
(B)
1st-2nd sleeve.
NOTE:
(E)
Angle of each shifting insert key is 120°.
(A)
MT-00600
6MT-86
(A) 2nd bushing
(B) 1st-2nd hub
ST
(A)
(B)
MT-00601
MT-00602