Subaru Legacy 2005 Service Manual page 2814

CLUTCH SYSTEM
4) Install the dust cover.
( A )
( B )
(A) Release lever
(B) Dust cover
5) Check the bearing for smooth movement by op-
erating the release lever.
6) Install the transmission assembly.
<Ref. to 5MT-32, INSTALLATION, Manual Trans-
mission Assembly.>
2. 6MT MODEL
1) Install the release bearing onto transmission.
2) Insert the release lever into release bearing tab.
(B)
(A) Release lever
(B) Release bearing
Release Bearing and Lever
CL-00023
(A)
ME-00052
CL-24
3) Apply grease to the specified points.
Grease:
NICHIMOLY N-130
(A)
(A) Spline
4) Insert the release shaft into release lever.
NOTE:
Make sure the cutout portion of the release shaft
contacts spring pin.
( C )
(A) Release lever
(B) Release shaft
(C) Spring pin
CL-00341
( B )
( A )
CL-00030