Subaru Legacy 2005 Service Manual page 2826

CLUTCH SYSTEM
10.Clutch Pedal
A: REMOVAL
1. LHD MODEL
1) Disconnect the ground cable from battery.
2) Remove the steering column. <Ref. to PS-24,
REMOVAL, Tilt Steering Column.>
3) Disconnect the connectors from the stop light
switch and clutch switch.
4) Remove the snap pins from the clevis pins which
secure lever to push rod and operating rod.
5) Remove the clevis pins which secure lever to
push rod and operating rod.
(A)
(D)
(C)
(A) Operating rod
(B) Push rod
(C) Snap pin
(D) Clevis pin
6) Remove the nut which secures clutch master
cylinder.
7) Remove the bolts which secure brake pedal and
clutch pedal, and remove the pedal assembly.
Clutch Pedal
2. RHD MODEL
1) Disconnect the ground cable from battery.
2) Remove the instrument panel lower cover.
3) Remove the clutch pedal catcher from bracket
(clutch pedal catcher).
(D)
(C)
4) Remove the clutch switch connector from clutch
(B) pedal.
CL-00292
5) Remove the snap pin and clevis pin which join
the push rod and clutch pedal.
6) Remove the master cylinder mounting nuts.
7) Remove the clutch pedal and bracket as a unit.
CL-00093
CL-36
(A)
(B)
(C)
(A) Bracket (Clutch pedal catcher)
(B) Clutch pedal catcher
(C) Clutch pedal
(D) Steering support beam
(A)
(A) Master cylinder
(A) Clutch pedal bracket
(B) Clutch pedal
(D)
CL-00274
CL-00216
(A)
(B)
CL-00126