Subaru Legacy 2005 Service Manual page 2868

REAR SUSPENSION
2. SHOCK ABSORBER
(1) Mount
(2) Upper rubber sheet
(3) Dust cover
C: CAUTION
• Wear work clothing, including a cap, protective
goggles and protective shoes during operation.
• Before discarding shock absorbers, be sure to
bleed gas completely. Also, do not throw away in
fire.
• Before removal, installation or disassembly, be
sure to clarify the failure. Avoid unnecessary re-
moval, installation, disassembly and replacement.
• Use SUBARU genuine grease etc. or equivalent.
Do not mix grease etc. with that of another grade or
from other manufacturers.
• Before securing a part on a vise, place cushion-
ing material such as wood blocks, aluminum plate,
or cloth between the part and the vise.
• Be sure to tighten fasteners including bolts and
nuts to the specified torque.
• Place shop jacks or rigid racks at the specified
points.
General Description
(4)
(5)
T3
(6)
(4) Coil spring
(5) Shock absorber
(6) Self-locking nut
RS-4
T1
(6)
(6)
T2
(1)
(2)
(3)
Tightening torque: N
T1: 30 (3.1, 22.4)
T2: 35 (3.6, 26)
T3: 62 (6.3, 46)
RS-00037
⋅
m (kgf-m, ft-lb)