AUTOMATIC TRANSMISSION (DIAGNOSTICS)
Engine cannot start on "P" or "N" range
Engine start other than "N" or "P" range
Engine stalls.
Engine stalls when shifting to "N" → "D" and "R" range.
General Diagnostic Table
Symptom
5AT(diag)-144
Problem parts
• Key switch and Starter
• Control cable adjustment
• Inhibitor switch
• CAN communication line
• TCM
• Key switch and Starter
• Control cable adjustment
• Inhibitor switch
• TCM
• Fluid level and condition
• Engine speed signal
• Torque converter turbine speed sensor
• Lock up solenoid valve
• Line pressure
• Fluid level and condition
• Engine speed signal
• Torque converter turbine speed sensor
• Lock up solenoid valve
• Line pressure