Table of Contents
Advertisement
12.Extension Case
A: REMOVAL
1) Remove the manual transmission assembly
from vehicle. <Ref. to 6MT-34, REMOVAL, Manual
Transmission Assembly.>
2) Prepare the transmission for overhaul. <Ref. to
6MT-40, Preparation for Overhaul.>
3) Remove the extension case.
4) Completely remove the remaining liquid gasket
from the extension case and transmission case.
B: INSTALLATION
1) Select the transfer driven gear thrust washer,
and then install to extension case. <Ref. to 6MT-49,
ADJUSTMENT, Extension Case.>
2) Apply oil lightly to the outer periphery of bearing
cone, and then install to extension case.
3) Select the thrust washer of transfer drive gear,
and then install to center differential.
4) Apply liquid gasket to the transmission case.
Liquid gasket:
THREE BOND 1215 (Part No. 004403007)
Extension Case
5) Install the extension case.
Tightening torque:
48 N
NOTE:
Insert the stopper portion of center differential be-
tween extension guides.
MT-00475
MT-00476
6) Install the manual transmission assembly into
vehicle. <Ref. to 6MT-36, INSTALLATION, Manual
Transmission Assembly.>
6MT-47
MANUAL TRANSMISSION AND DIFFERENTIAL
⋅
m (4.9 kgf-m, 35.4 ft-lb)
(B)
(A)
(A) Extension guide
(B) Stopper
(C) Center Differential
(D) Extension case
MT-00475
(C)
(D)
MT-00973
Advertisement
Chapters
Table of Contents
