Subaru Legacy 2005 Service Manual page 2005

8. MT Gear Shift Lever
A: REMOVAL
1. 5MT MODEL
1) Set the vehicle on a lift.
2) Disconnect the ground cable from battery.
3) Remove the gear shift knob.
4) Remove the console box. <Ref. to EI-53, RE-
MOVAL, Console Box.>
5) Remove the front cover assembly.
6) Remove the clamp.
7) Remove the boot and insulator assembly.
8) Remove the harness clamp from plate.
MT Gear Shift Lever
9) Remove the plate assembly from vehicle body.
10) Lift-up the vehicle.
11) Remove the rear exhaust pipe and muffler.
• SOHC model
<Ref. to EX(H4SO 2.0)-10, REMOVAL, Rear Ex-
haust Pipe.> <Ref. to EX(H4SO 2.0)-12, REMOV-
AL, Muffler.>
• DOHC non-turbo model
<Ref. to EX(H6DO)-7, REMOVAL, Rear Exhaust
Pipe.> <Ref. to EX(H6DO)-9, REMOVAL, Muffler.>
• DOHC turbo model
CS-00311
<Ref. to EX(H4DOTC)-11, REMOVAL, Rear Ex-
haust Pipe.> <Ref. to EX(H4DOTC)-10, REMOV-
AL, Joint Pipe.>
12) Remove the heat shield cover.
CS-00312
13) Remove the stay from transmission bracket.
CS-00313
CS-37
(A)
(B)
(A) Stay
(B) Transmission bracket
CONTROL SYSTEMS
CS-00563
AT-01331
CS-00050