Table of Contents
Advertisement
4) Attach the magnet at the specified position of oil
pan.
5) Apply liquid gasket to the oil pan.
Liquid gasket:
THREE BOND 1217B (Part No. K0877YA020)
6) Install the oil pan by equally tightening the bolts.
Tightening torque:
⋅
5 N
m (0.5 kgf-m, 3.7 ft-lb)
7) Pour ATF through the oil charge pipe.
Specified fluid:
<Ref. to 5AT-2, SPECIFICATION, General De-
scription.>
Capacity:
Fill the same amount of ATF when drained.
8) Check the ATF level.
<Ref. to 5AT-28, Automatic Transmission Fluid.>
9) Perform the Clear Memory 2. <Ref. to 5AT(di-
ag)-19, CLEAR MEMORY MODE, OPERATION,
Subaru Select Monitor.>
10) Perform the inspection with driving the vehicle
at the end of repair work, and make sure there is no
faulty as below;
• Excessive shift shock
• Oil leakage from transmission body and etc.
• Occurrence of noise caused by interference etc.
NOTE:
If excessive shift shock is felt, execute the advance
operation of learning control. <Ref. to 5AT(diag)-
23, PROCEDURE, Learning Control.>
Control Valve Body
C: INSPECTION
Check each parts for holes, damages or other for-
eign matters.
AT-01959
AT-01955
5AT-59
AUTOMATIC TRANSMISSION
Advertisement
Chapters
Table of Contents
