Subaru Legacy 2005 Service Manual page 2676

MANUAL TRANSMISSION AND DIFFERENTIAL
C: CAUTION
• Wear work clothing, including a cap, protective
goggles, and protective shoes during operation.
• Remove contamination including dirt and corro-
sion before removal, installation or disassembly.
• Keep the disassembled parts in order and pro-
tect them from dust and dirt.
• Before removal, installation or disassembly, be
sure to clarify the failure. Avoid unnecessary re-
moval, installation, disassembly and replacement.
• When disassembling the case and other light al-
loy parts, use a plastic hammer to open the case.
Do not pry it apart with a screwdriver or other tool.
• Be careful not to burn yourself, because each
part on the vehicle is hot after running.
• Use SUBARU genuine gear oil, grease etc. or
the equivalent. Do not mix gear oil, grease etc. with
that of another grade or from other manufacturers.
D: PREPARATION TOOL
1. SPECIAL TOOL
ILLUSTRATION
ST-398791700
(2) (1)
(3)
(5) (6)
(4)
ST-399527700
General Description
TOOL NUMBER DESCRIPTION
398791700 REMOVER
399527700 PULLER SET
6MT-14
• Be sure to tighten fasteners including bolts and
nuts to the specified torque.
• Place shop jacks or rigid racks at the specified
points.
• Apply gear oil onto sliding or revolution surfaces
before installation.
• Replace deformed or otherwise damaged snap
rings with new ones.
• Before installing O-rings or oil seals, apply suffi-
cient amount of gear oil to avoid damage and defor-
mation.
• Be careful not to incorrectly install or fail to install
O-rings, snap rings and other such parts.
• Before securing a part on a vice, place cushion-
ing material such as wood blocks, aluminum plate,
or cloth between the part and the vice.
• Avoid damaging the mating surface of the case.
• Before applying sealant, completely remove the
old seal.
Used for removing and installing spring pin (6
mm).
Used for removing and installing roller bearing
(Differential).
(1) Bolt (899521412)
(2) Puller (399527702)
(3) Holder (399527703)
(4) Adapter (398497701)
(5) Bolt (899520107)
(6) Nut (021008000)
REMARKS