Subaru Legacy 2005 Service Manual page 2612

MANUAL TRANSMISSION AND DIFFERENTIAL
C: DISASSEMBLY
1) Using the ST, remove the roller bearing (exten-
sion case side).
ST 498077000 REMOVER
(A)
(A) Roller bearing
2) Using the ST1 and ST2, remove the roller bear-
ing (transfer case side).
ST1 498077000 REMOVER
ST2 899864100 REMOVER
(A)
(A) Roller bearing
D: ASSEMBLY
1) Using the ST, install the roller bearing (extension
case side).
ST1 398177700 INSTALLER
ST2 899864100 REMOVER
NOTE:
Do not apply pressure in excess of 10 kN (1 ton, 1.1
US ton, 1.0 Imp ton).
(A)
(A) Roller bearing
Transfer Driven Gear
ST
MT-00143
ST2
ST1
MT-00144
ST2
ST1
MT-00145
5MT-50
2) Using the ST, install the roller bearing (transfer
case side).
ST 499757002 INSTALLER
NOTE:
Do not apply pressure in excess of 10 kN (1 ton, 1.1
US ton, 1.0 Imp ton).
(A) Roller bearing
E: INSPECTION
1) Bearings
Replace the bearing in following cases:
• In case of broken or rusty bearings
• In case of worn or damaged bearings
• When the bearings fail to turn smoothly or emit
noise in rotation after gear oil lubrication.
2) Driven gear
Replace the driven gear when their tooth surface
and shaft are excessively broken or damaged.
ST
(A)
MT-00146