Table of Contents
Advertisement
AUTOMATIC TRANSMISSION
9) Remove the oil cooler inlet and outlet pipes.
NOTE:
When disconnecting the outlet pipe, be careful not
to lose the ball and spring used with retaining
screw.
(A)
(B)
(A) Outlet pipe
(B) Inlet pipe
2. ATF COOLER MODEL WITH WARMER
FUNCTION
1) Lift-up the vehicle.
2) Remove the front exhaust pipe.
<Ref. to EX(H6DO)-4, REMOVAL, Front Exhaust
Pipe.>
3) Disconnect the inlet and outlet of the ATF cooler
hoses from oil cooler pipe.
4) Remove the union screw of oil cooler inlet and
outlet pipes.
ATF Cooler Pipe and Hose
5) Remove the bolts which secure pipe on the side
of transmission.
6) Lower the vehicle.
7) Remove the air intake chamber.
<Ref. to IN(H6DO)-7, REMOVAL, Air Intake Cham-
AT-01383
ber.>
8) Remove the resonator chamber.
<Ref. to IN(H6DO)-9, REMOVAL, Resonator
Chamber.>
9) Remove the oil charge pipe. <Ref. to 5AT-69,
REMOVAL, Oil Charge Pipe.>
10) Disconnect the ATF cooler hoses and pipes.
11) Remove the bolt which secure pitching stopper
bracket and the bolt on the side of transmission,
and then remove ATF cooler pipe.
AT-02027
AT-02029
5AT-64
AT-02028
AT-02030
AT-02033
Advertisement
Chapters
Table of Contents
