Subaru Legacy 2005 Service Manual page 2646

MANUAL TRANSMISSION AND DIFFERENTIAL
19.Front Differential Assembly
A: REMOVAL
1) Remove the manual transmission assembly
from vehicle. <Ref. to 5MT-30, REMOVAL, Manual
Transmission Assembly.>
2) Remove the transfer case with extension case
assembly. <Ref. to 5MT-43, REMOVAL, Transfer
Case and Extension Case Assembly.>
3) Remove the transmission case. <Ref. to 5MT-
55, REMOVAL, Transmission Case.>
4) Removes the drive pinion shaft assembly. <Ref.
to 5MT-76, REMOVAL, Drive Pinion Shaft Assem-
bly.>
5) Remove the main shaft assembly.
• Single-range model
<Ref. to 5MT-61, REMOVAL, Main Shaft Assembly
for Single-Range.>
• Dual-range model
<Ref. to 5MT-66, REMOVAL, Main Shaft Assembly
for Dual-Range.>
6) Remove the differential assembly.
NOTE:
• Be careful not to confuse right and left roller
bearing outer races.
• Be careful not to damage the oil seal of retainer.
7) Remove the differential side retainers using ST.
ST 499787000 WRENCH ASSY
ST
Front Differential Assembly
B: INSTALLATION
1) Install the differential side retainers using ST.
ST 499787000
2) Install the bearing outer race on transmission
case.
3) Install the differential assembly.
NOTE:
Be careful not to fold the sealing lip of oil seal.
4) Install the main shaft assembly.
• Single-range model
<Ref. to 5MT-61, INSTALLATION, Main Shaft As-
sembly for Single-Range.>
• Dual-range model
<Ref. to 5MT-66, INSTALLATION, Main Shaft As-
sembly for Dual-Range.>
5) Install the drive pinion assembly. <Ref. to 5MT-
76, INSTALLATION, Drive Pinion Shaft Assem-
bly.>
6) Install the transmission case. <Ref. to 5MT-57,
INSTALLATION, Transmission Case.>
7) Install the transfer case with extension case as-
sembly. <Ref. to 5MT-43, INSTALLATION, Trans-
fer Case and Extension Case Assembly.>
8) Install the manual transmission assembly into
vehicle. <Ref. to 5MT-32, INSTALLATION, Manual
MT-00162
Transmission Assembly.>
MT-00176
5MT-84
WRENCH ASSY
MT-00162