Subaru Legacy 2005 Service Manual page 2741

Hide thumbs Also See for Legacy 2005:
Table of Contents

Advertisement

20) Install the 6th baulk ring.
21) Apply sufficient amount of gear oil to the main
shaft, and the inside of 6th needle bearing and 6th
drive gear.
22) Install the 6th drive gear.
23) Install the 6th needle bearing.
24) Set the 6th bushing to main shaft, taking care
not to overlap the 6th bushing oil hole and main
shaft oil hole.
(A)
(A) 6th bushing oil hole
(B) Main shaft oil hole
Main Shaft Assembly
MT-00573
MT-00574
MT-00575
(A)
(B)
MT-00576
6MT-79
MANUAL TRANSMISSION AND DIFFERENTIAL
25) Using the ST, install the 6th bushing.
ST1 18651AA000 INSTALLER
ST2
398177700 INSTALLER
CAUTION:
Do not apply pressure in excess of 40 kN (4.0
ton, 4.4 US ton, 3.9 Imp ton).
26) Be sure 6th drive gear is rotated smoothly by
hands. If it is not rotated smoothly, reassemble it.
27) Using the ST, install the inner race of inner
bearing.
ST1 18651AA000 INSTALLER
ST2
398177700 INSTALLER
CAUTION:
Do not apply pressure in excess of 40 kN (4.0
ton, 4.4 US ton, 3.9 Imp ton).
28) Using the ST, install the retainer and inner race
of outer bearing.
ST1 18651AA000 INSTALLER
ST2
398177700 INSTALLER
CAUTION:
Do not apply pressure in excess of 40 kN (4.0
ton, 4.4 US ton, 3.9 Imp ton).
ST1
ST2
MT-00577
ST1
ST2
MT-00578

Advertisement

Table of Contents
loading

Table of Contents