Subaru Legacy 2005 Service Manual page 2351

37) Disconnect the hose from the ATF inlet and
outlet pipes.
38) Remove the ATF cooler bracket from transmis-
sion body. (ATF cooler model with warmer func-
tion)
• Non-turbo model
39) Remove the front crossmember support plate.
<Ref. to FS-14, REMOVAL, Front Crossmember
Support Plate.>
Automatic Transmission Assembly
AT-01390
AT-02034
5AT-41
AUTOMATIC TRANSMISSION
40) Remove the two clutch housing cover securing
bolts.
41) Remove the front stabilizer bracket. <Ref. to
FS-15, REMOVAL, Front Stabilizer.>
42) Remove the bolts which secure front ball joint
to the housing. <Ref. to FS-16, REMOVAL, Front
Ball Joint.>
43) Pull out the drive shaft from transmission.
44) Set the transmission jack under the transmis-
sion.
45) Remove the rear crossmember.
AT-01373
AT-01374
AT-01376
AT-01377