Table of Contents
Advertisement
FRONT SUSPENSION
2. REAR BUSHING
1) Install the rear bushing with its longer inner cyl-
inder faced upward and its shorter one faced down-
ward and protruding part rearward as shown in the
figure.
(1)
(1) Front arm
(2) Bushing inner cylinder
(3) Longer
(4) Shorter
(5) Protrusion portion
2) Align the center of rear bushing recess portion
with the aligning mark on the front arm.
(1) Alignment mark
(2) Recess portion
Front Arm
(5)
(3)
(4)
(2)
FS-00113
(1)
(2)
(1)
FS-00136
FS-20
3) Using the ST and a press, install the rear bush-
ing.
ST1 20299AG000 REMOVER
ST2 20299AG010 BASE
(1)
(2)
(1) Press
(2) Front arm
(3) Rear bushing
E: INSPECTION
1) Check the front arm for wear, damage or cracks,
and correct or replace if defective.
2) Check the bushing for crack, fatigue or damage.
ST1
(3)
ST2
FS-00127
Advertisement
Chapters
Table of Contents
