Subaru Legacy 2005 Service Manual page 2348

AUTOMATIC TRANSMISSION
9. Automatic Transmission As-
sembly
A: REMOVAL
1) Set the vehicle on a lift.
2) Fully open the front hood and support with hood
stay.
3) Disconnect the ground cable from battery.
4) Remove the collector cover.
5) Remove the intercooler. (Turbo model)
<Ref. to IN(H4DOTC)-12, REMOVAL, Intercool-
er.>
6) Remove the air intake chamber. (Non-turbo
model) <Ref. to IN(H6DO)-7, REMOVAL, Air Intake
Chamber.>
7) Remove the air cleaner case. (Non-turbo model)
<Ref. to IN(H6DO)-5, REMOVAL, Air Cleaner
Case.>
8) Remove the air breather hose. <Ref. to 5AT-68,
REMOVAL, Air Breather Hose.>
9) Remove the starter. <Ref. to SC(H4SO 2.0)-6,
REMOVAL, Starter.>
10) Disconnect the following connectors.
• Turbo model
(1) Transmission harness connectors
(2) Front oxygen (A/F) sensor
Automatic Transmission Assembly
AT-01364
AT-01379
5AT-38
• Non-turbo model
(1)
(1) Front oxygen (A/F) sensor
(2) Transmission harness connectors
11) Remove the intercooler stay and engine hang-
er rear. (Turbo model)
12) Disconnect the engine harness connectors,
and then remove the engine hanger rear. (Non-tur-
bo model)
(A)
(A)
(A) Engine harness connectors
(B) Engine hanger rear
(2)
AT-02025
AT-01365
(B)
AT-02023