Table of Contents
Advertisement
MANUAL TRANSMISSION AND DIFFERENTIAL
16.Center Differential
A: REMOVAL
1) Remove the manual transmission assembly
from vehicle. <Ref. to 6MT-34, REMOVAL, Manual
Transmission Assembly.>
2) Prepare the transmission for overhaul. <Ref. to
6MT-40, Preparation for Overhaul.>
3) Remove the extension case. <Ref. to 6MT-47,
REMOVAL, Extension Case.>
4) Remove the transfer driven gear. <Ref. to 6MT-
58, REMOVAL, Transfer Driven Gear.>
5) Remove the thrust washer and center differen-
tial.
(A) Thrust washer
(B) Center Differential
6) Remove the needle bearing.
Center Differential
(A)
(B)
MT-00515
MT-00516
6MT-60
B: INSTALLATION
1) Install the needle bearing.
2) Install the thrust washer and center differential.
(A) Thrust washer
(B) Center Differential
3) If replacing the center differential, select the
transfer drive gear and thrust washer and install.
<Ref. to 6MT-49, ADJUSTMENT, Extension
Case.>
4) Install the transfer driven gear. <Ref. to 6MT-58,
INSTALLATION, Transfer Driven Gear.>
5) Install the extension case. <Ref. to 6MT-47, IN-
STALLATION, Extension Case.>
6) Install the manual transmission assembly into
vehicle. <Ref. to 6MT-36, INSTALLATION, Manual
Transmission Assembly.>
C: INSPECTION
Check there is no damage on the center differen-
tial. Replace if damaged.
MT-00516
(A)
(B)
MT-00515
Advertisement
Chapters
Table of Contents
