Subaru Legacy 2005 Service Manual page 2843

C: CAUTION
• Wear work clothing, including a cap, protective
goggles and protective shoes during operation.
• Before removal, installation or disassembly, be
sure to clarify the failure. Avoid unnecessary re-
moval, installation, disassembly and replacement.
• Use SUBARU genuine grease etc. or equivalent.
Do not mix grease etc. with that of another grade or
from other manufacturers.
D: PREPARATION TOOL
1. SPECIAL TOOL
ILLUSTRATION
(1)
(2)
ST-927380002
ST-927680000
ST20299AG000
General Description
TOOL NUMBER DESCRIPTION
927380002 ADAPTER
927680000 INSTALLER &
REMOVER SET
20299AG000 REMOVER
FS-5
• Before securing a part on a vise, place cushion-
ing material such as wood blocks, aluminum plate,
or cloth between the part and the vise.
• Be sure to tighten fasteners including bolts and
nuts to the specified torque.
• Place shop jacks or rigid racks at the specified
points.
Used as an adapter for camber & caster gauge
when measuring camber and caster.
(1) 28199AC000 PLATE
(2) 28199AC010 BOLT
Used for replacing the front arm front bushing.
Used for replacing the front arm rear bushing.
Used with BASE (20999AG010).
FRONT SUSPENSION
REMARKS